My Favorite Upholstery Tools

Yesterday, I spoke about my September Upholstery Project Tutorial. Here are my favorite tools that I use when I upholster

             *******UPDATE - The tutorial has begun - ********

First up,

a pneumatic gun, and staples (the common size I like to use is 3/8") There is no other choice for me. I have tried them all. If you are serious about doing several projects, then you need one of these. However, If you think this might be a one time only project...you can use something else. You can find a staple gun for about $100. You could also share one with a friend to cut the cost.



Next, a compressor

Again, If you use a pneumatic gun, you must have a compressor to power it. A compressor is easy to "borrow" from a friend or neighbor. It is also used for many power tools. Someone you know probably has one. You can buy one for about $100. The only thing you need to know is the amount of HP (Horse Power) it has. You only need 1HP for an upholstery gun.


An electric staple gun.

This is an OK alternative to the pneumatic gun. If you don't think you will upholster again, this is fine. The problem that I have found with this is that it does not drive the staples deep into the wood. After using this, you will probable need to hammer the staples in further.


Additional tools

A tack hammer, needle nose pliers, and a staple puller. All of these are readily available at either a home improvement store, or a better craft store. Easily found on-line, as well (search upholstery supplies).


Finally,

 

 a rubber mallet, fresh razor blades and safety glasses

I have not decided on the fabric yet. However, I am sure that it will be something from my fabric addiction collection.

Have a creative weekend!

Linking to Savy City Farmer